New Kubota KX080-4S Excavator

Description

New Kubota KX080-4S Excavator

 

Common Rail System and Diesel Particulate Filter

(DPF) Muffler

The Common Rail System (CRS) electronically controls the fuel injection

timing and amount in stages rather than all at once for optimal combustion.

The results are great efficiency, better fuel economy and less engine noise.

Its combination with the Exhaust Gas Recirculation (EGR) and Diesel

Particulate Filter (DPF) Muffler reduces emissions to make the KX080-4S

engine Tier IV certificated.

Automatic Regeneration System

Kubota’s original automatic regeneration system automatically burns

accumulated particulate matter (soot) in the DPF muffler to keep the muffler

clean for longer operation. For safety reasons, automatic regeneration can

be turned off with the inhibit switch when the excavator is operating in

areas that contain flammable materials.

Introducing ECO e PLUS

Kubota’s original ECO e PLUS prioritizes fuel economy, and supports the

environment. In Standard mode, KX080-4s delivers up to 8% productivity

improvement and 14% fuel savings over the previous model. For even

greater fuel savings, activate ECO e PLUS Mode with the flick of a switch

for up to 16% fuel savings over Standard Mode. Other benefits of the new

ECO e PLUS mode include a reduction of noise as well as improved front

attachment operations.

 

2-Pump Load-Sensing Hydraulic System

A new 2-pump load-sensing system improves the overall smoothness of operations when using front

attachments, letting you effortlessly perform simultaneous operations. You’ll notice the difference when

simultaneously operating the front working group while traveling.

Tight Tail Swing and Compact Machine Width

Thanks to its contoured, tight tail design created by the shorter rear overhang, the KX080-4S has excellent

stability, can handle a wider range of loads, and can work in more restrictive spaces. The compact 7’2.6″ width

of the under-carriage makes it ideal for working in close conditions, and much easier to transport between job

sites.

Industrial Digging Force

You need exceptional power when trenching through compacted soil. With the KX080-4S, elevated

productivity levels are certain with the combination of 14,660 lbs. bucket force and 8,554 lbs. arm forces. The

KX080-4S powers through those demanding applications so that you can quickly move on to the next job.

Auto-Shift

The auto-shift system enables automatic travel shift from high to low depending on traction effort and terrain.

This gives smoother simultaneous operations when dozing and turning.

 

Proportional Flow Control of Auxiliary Circuits

(AUX1/2) and Maximum Oil Flow Settings

Two auxiliary circuits (AUX 1 & 2) come standard on the KX080-4S.

The convenient thumb-operated switch allows easy proportional flow

control of the auxiliary circuit, while a forefinger-operated on/off

switch enables simple operation of special applications that require a

constant oil flow. The maximum oil flow setting is conveniently

adjustable from the digital panel. You can even program up to five oil

flow rates corresponding to specific attachments so they can be

quickly retrieved for the next job.

Adjustable Maximum Oil Flow Control for Auxiliary Port

This unique function lets you control the oil flow and eliminates the

hassle of using tools to change settings manually. The system will

even store your settings for the next time you need it. Adjustable oil

flow enhances performance and saves fuel.

Hydraulic Angle Blade (option)

Save time and work more efficiently. With a simple movement of the

new thumb operated rocker switch on the dozer lever, the hydraulic

angle blade can be angled to the right or left to push soil to the side

as the machine moves forward, eliminating the need for repetitive

repositioning at right angles when backfilling trenches.

Auto Idling System

Save fuel with Kubota’s Auto Idle. Reduce engine RPM instinctively when high engine speed isn’t needed. When

the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control

lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions

while reducing operating costs.

 

Hydraulic Angle Blade (option)

Float Position

You don’t need to adjust the dozer height to make a clean ground

surface-after backfilling, just travel backward along the covered ditch

with the dozer in the float position. Ground finishing work is now fast and

easy!

Easy Operation

Up, down, left, and right – the angle blade can be moved and positioned

with just a single lever.

 

Easy-Open Front Window

Unlike many excavator windows, the front glass window of the KX080-4S

opens with ease. Just flip the latch on the side of the window and slide it

up. A gas-assist mechanism makes this action almost effortless.

Window Guard (Optional)

Operators need protection from flying chips and debris when using some attachments. On some sites antivandalism

is important. Kubota provides the window guard mounting points around the front window as a

standard feature.

Cab Guttering

The KX080-4S features a guttering system to the cab’s roof. This helps prevent rainwater from entering the

cab, even when the window is open on a rainy day.

 

Air Conditioner

Overall air circulation in the cab is better than ever, thanks to a stronger

cooling/heating unit and the positioning of six vents. Airflow is also

directed towards the operator’s face for better all-round comfort.

Deluxe Suspension Seat

Designed and engineered with comfort in mind, Kubota’s high-back

suspension seat reduces strain and minimizes operator fatigue. It

reclines to accommodate your individual posture, and offers weight

compensation, firm wrist support and retractable seat belts.

Cup Holder

With the convenience of a bigger cup holder, you can quench your

thirst and work longer without leaving the cab. Or store your cell

phone*. The charging port is located conveniently close by.

*Cell phones should not be used during machine operation.

 

Movable Console

Raise the safety control lever and the console moves with it, providing more room for entry and exit. To

prevent unexpected machine movement during entry or exit, all control levers are then disabled until the

console is back in place.

TPSS

The Two-Pattern Selection System can shift control styles, whether it’s the

ISO pattern or the SAE backhoe pattern, with the simple turn of a switch.

ROPS/OPG (TOP Guard, Level I)

The OSHA-certified ROPS/OPG (TOP Guard, Level I) provides protection in the event of accidental rollovers

and falling objects.

Underbody Cover

The underbody beneath the engine features a mesh cover to prevent gravel and soil from entering.

Steel Crawler (Optional)

A rugged steel crawler is an excellent option for using your KX080-4S on worksites that may compromise the

durability or integrity of the standard rubber crawler. In addition to an 18-inch crawler, an extra-wide 24-inch

model is available for increased floatation.

 

Swivel Negative Brake

The swivel negative brake automatically locks the swivel function in its current position. This prevents

unexpected machine movement. It’s particularly useful during work on inclines or when transporting the

excavator between worksites.

 

One-Sided Engine Maintenance

A. Dual Element Air Cleaner

B. DPF Muffler

C. Fuel Filter

D. Alternator

E. Starter Motor

F. Oil Filter

G. Battery

H. Water Separator

 

Triple Opening Hood

All three of the excavator’s access panels can open at once. This allows you to easily inspect and view the

centrally located components of the KX080-4S. You can easily access the hydraulic components under the center

hood, or the battery, oil filter and tool box under the right hood. Maintaining your excavator has never been this

easy.

Variable Speed Fan

The variable speed fan drive provides the right amount of cooling efficiency by regulating the engine fan speed

according to the ambient temperature after the air passes through the radiator. The benefits are reduced fan noise

and fuel savings through effective use of engine output.

 

Two-Piece Hose Design

Kubota’s innovative two-piece hose design for the dozer blade reduces hose replacement time by nearly 60%

compared to non-joint types. This design virtually eliminates the need to enter the machine for maintenance.

Double Structure Muffler

The double structure muffler controls increases in muffler temperature caused by automatic regeneration of

the DPF.

Tie Down

Tie down points are now installed on the track frame and the cabin.

Digital Panel

Following the excellence of Kubota’s Intelligent Control System,

the new digital panel puts convenience at the operator’s fingertips.

Featuring easier button operation, the user-friendly digital panel is

positioned to the front right corner of the operator. This

operator facing wider display greatly improves visibility. With easier

access, simpler settings, easy-to-read indicators and alerts, you’ll

always be aware of the excavator’s functioning status.

 

Operation History Record

Operation history is automatically recorded on the KX080-4S. You can

trace back up to 90 days of the machine’s usage dates by simply

checking the built-in calendar.

Automatic Regeneration Mode

The automatic regeneration system automatically burns particulate matter (soot) that accumulates in the

diesel particulate filter (DPF) muffler. The soot is burned when the engine is operating at sufficient speed for

regeneration. If the engine speed is lower than the required level for regeneration, the indicator requests an

increase in the engine speed to keep the accumulation level low and the DPF clean. A service call or DPF filter

replacement is required when the accumulated soot reaches a level that reduces the engine speed.

KX080-4S OPTIONS

STANDARD EQUIPMENT

Safety system

Engine start safety system

Travel motor with disc brake

Swivel motor with disc brake

All hydraulic control

Working equipment

Auxiliary hydraulic circuit 1 and 2 (proportional

control)

2 working lights on cab and 1 light on the

boom

Thumb bracket and relief valve

Operator’s space

Cab with A/C

Digital panel with diagnosis function

Weight-adjustable full suspension seat

Retractable seat belt

Hydraulic pilot control levers with wrist rests

Travel levers with foot pedals

Two pattern selection system

12V power source

Cup holder

Horn

Engine/Fuel system

Double element air filter

Auto idling system

Water separator

 

KX080-4S OPTIONS

STANDARD EQUIPMENT

Undercarriage

Dozer blade with float function

17.7″ (450mm) rubber track

1 x upper track roller

5 double-flange track rollers on each side

2-speed travel switch on dozer lever

2-speed travel with auto-shift

Hydraulic system

Pressure accumulator

Hydraulic pressure checking ports

Third line hydraulic return

2-pump load sensing system

Five adjustable AUX presets for precise

auxiliary oil flow requirements for circuits 1

and 2

Others

Tool box

Grease gun holder

OPTIONAL EQUIPMENT

Beacon lights

17.7″ (450mm) and 24″ (610mm) steel track

Angle blade with float function and BOE

Travel alarm

 

Specifications

  • Registration date:
  • Condition: New
  • Fuel: Diesel

REQUEST INFO